HOME HDK79NA

HDK-79NA   Extended Optics HD Camera


 

The HDK-79NA camera system is a high performance full digital camera for the various applications, such as helicopter and POV camera system etc., in which our accumulated HDTV camera technologies are completely harmonized. Using high-end compact and light weight (only 0.95kgs) HDTV camera, the HDL-37E camera head as detached optical block, it is ideally suited for the digital broadcast era to enable HDTV applications in every field of broadcasting.


User's quotes;
  • Goodyear Blimp (Akron, OH)
  • Features
    • 2/3-inch 2,200,000-pixel FIT CCDs
      2/3-inch 2.2M pixel 1080i FIT CCDs are employed to achieve superb picture quality with a horizontal resolution of 1,000 TV lines.

    • Full Digital
      Using newly developed digital process ICs, the video signals are digitized with 10-bit A/D conversion and up to 28-bit internal digital processing circuit. As non-linear processing such as gamma correction is performed digitally, consistent and repetitive high picture quality and stable reliability is assured. A detail correction system, including digitally processed horizontal, vertical, and diagonal correction signal for red, green and blue video, is incorporated into the camera head, and obtains noise-free full resolution HDTV picture quality even if the camera is used in stand-alone configuration.

    • High Picture Quality
      High Picture Quality is maintained for the actual operating condition, such as the resolution under high or low illumination and the S/N ratio when turning DTL and gamma on.

    • HD SDI Output from the Camera Adaptor
      HD SDI output is provided from the camera adaptor(CA-79 or FA-79), and direct connection is possible with HD digital equipment, such as an HD VTR.

    • Flexible Cable
      The distance between the camera body and optical block can be extended up to 30m, when a thin Flexible cable (9.4mm in diameter) may be used. With the specified cable and the sensing DC power unit, it can be extended up to 200m.

    • Remote Control Panel System
      A variety of images can be made by connecting a compact remote control panel. (optionally available) RM-11, RM-50 (RCP-50 Panel with Case) equipped with various operating or maintenance.

    • Hyper Gain Up (order optionally available)
      Using the specified optical system and noise reduce technology, Hyper Gain function achieves a minimum illumination of 0.51x/f1.4 (with +42dB gain-up)

    System Configurations
    • HDK-79NA (HDL-37E+Head body without optical block) + CA-79
      Helicopter Camera System, Discovery Camera, Crane Camera System

    • HDK-79NA (HDL-37E+Head body without optical block) + FA-79 + CCU-790
      POV(Point of View) Applications, Remote Panffilt Camera
      * Simultaneous output of HDTV (1080i) and SDTV (480i) is available from CCU-790 thanks to the incorporated down converter into CCU-790.

    SPECIFICATIONS
    Ratings
    Scanning system 1125 (59.94Hz 1080i)
    CCD image sensor 2/3-inch 2,200,000 pixel Frr CCD
    Optical system 2/3-inch 3CCD f1.4
    Lens mount 2/3-inch BTA S-1005B
    Ambient temperature 10°C +45°C
    Relative humidity 30% - 90%
    Operating voltage 11 - 16V
    Weight (Approx) Camera head without optical block
    (5.6kgs/including camera adaptor) (12.31bs)
    Detached optical block (0.95kgs) (2.091bs)
    Dimensions Camera head without optical block
    (W105 x H222 x D375 mm) (W4.1 x H8.7 x D14.8 inches)
    Detached optical block
    (W72 x H103 x D109 mm) (W2.83 x H4.06 x D4.29 inches)
    Performance
    Sensitivity F8/2,000lx
    S/N 54dB (Cable length 5m)
    Limiting resolution 1,000 TV lines
    Modulation depth 40% or more (800 TV lines 27.5MHz)
    Power consumption Approx 39W (SDI operation: Approx 44W)
    Contour correction Vertical : 2 line
    Horizontal Boost frequency : 17MHz-22MHz
    Input signals Return video signal : Y,Pb,Pr 4:1:1
    External SYNC signal : SYNC (0.6Vp-p ± 6dB)
    Audio signal : -60 - -40dB(Varlable) / -20dB(Fixed) 600ohm (2ch, balanced)
    Intercom signal 2ch (ENG/PROD)(110 type or XLR type)
    Output signals [Video signals: CA-79]
    Analog signal : R,G,B or Y,Pb,Pr each 1ch, 75 ohm (multi-pin connector)
    HD SDI signal : Y,Pb,Pr 4:2:2 serial digital 1ch (SMPTE 292M)
    VTR signal : BTA S-1005-B
    Monitor signal : R,G,B or Y,Pb,Pr each 1ch 75 ohm (multi-pin connector)
    Intercom signal : 0dBs 2ch (ENG/PROD) (110 type or XLR type)

    [Video signals: FA-79]
    Analog signal : R,G,B orY,Pb,Pr each 1ch, 75 ohm (multi-pin connector)
    HD SDI signal : Y,Pb,Pr4:2:2 serial digital 2ch (SMPTE 292M)
    Q-TV signal : Analog signal (4.5MHz band width)1ch 75 ohm (BNC connector)
    Return out : HD analog signal1ch 75 ohm (BNC connector)
    VTR signal : BTA S-1005-B
    Monitor signal : R,G,B or Y,Pb,Pr each 1ch 75 ohm (multi-pin connector)
    Intercom signal : 0dBs 2ch (ENG/PROD) (110 type or XLR type)
    Optical filter (manual-operation) 1: 3200° K + 12.5%ND
    2: 5600° K + 12.5%ND
    3: 5600° K + 6.2%ND
    GAMMA OFF, 0.35, 0.4, 0.45
    GAIN 3dB, 0dB, +3dB, +6dB, +12dB
    Electrical color temperature 5600° K
    Control Function items
    Analog Control
    RGB BLACK SET DTL LEVEL
    RGB GAIN DTL THRESH
    RGB FLARE DTL BALANCE
    RGB GAMMA DTL BOOST FREQUENCY
    RGB PEDESTAL DTL COARING
    MASTER PEDESTAL SKIN DTL R HUE
    RGB WHITE SHADE
    (HN SA W, PARA)
    SKIN DTL B HUE
    KNEE POINT IRIS
    KNEE SLOPE SHUTTER SPEED
    On/Off Control
    CAL WHITE CLIP
    BARS AWB
    FLARE ABB
    MATRIX SKIN DTL
    KNEE COLOR TEMP
    DTL AHD (Auto Hue Detect)
    SOFT DTL  
    Automatic Function
    AWB RGB FLARE
    ABB RGB GAMMA
    IRIS RGB PEDESTAL
    AUTO SET UP MASTER PEDESTAL
    RGB BLK SET RGB BLK SHADE
    RGB GAIN RGB WHT SHADE
    Design and specifications are subject to change without notice.
    Home | All Products | Contact | Site Map |